Olympic Game And The Fifa World Cup Management Essay Example

Olympic Game And The Fifa World Cup Management Essay South Africa is known as a fast-developing state, and World Cup is possibly the biggest event of all time in its district. However, the substructures in this Africans biggest economic system were still hapless when they won the command in 2004. Therefore, its no uncertainty a great challenge for this state. Furthermore, with the bad repute of African undertaking failure syndrome ( Rwelamila, Talukhaba A ; Ngowi, 1999 ) and eventuality locale ( DellApa,2008 ) , many people has a deep misgiving to countrys capableness to finish this monolithic undertaking. While Canada presents a different scene, where 1976 Montreal Summer Olympic and 1988 Calgary Winter Olympic were staged, with advanced systems in featuring locales, transit, communicating services. Besides, the authorities and authorization had accumulated much experience prior to this game. The International Olympic Committee ( IOC ) had great assurance that Canada will show a superb tourney to the universe. Key Stakeholders Pre-event readying We will write a custom essay sample on Olympic Game And The Fifa World Cup Management specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Olympic Game And The Fifa World Cup Management specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Olympic Game And The Fifa World Cup Management specifically for you FOR ONLY $16.38 $13.9/page Hire Writer Planning, readying and proving are indispensable to the success of the Games. During the preparative stage, The building of substructure is a cardinal parametric quantity for measuring the preliminaries. Yardstick for measuring overall undertaking public presentation These two undertakings were both over-budget Table 3: Planned budget versus concluding costs of the 10 World Cup bowls ( Baloyi and Bekker, 2011 ) Harmonizing to the tabular array, except from two losing informations, the other eight bowl were all over-budget, the estimated budget was R11.7 one million millions, but the concluding cost was 35 % beyond the budget. Baloyi and Bekker ( 2011 ) found that overspending is caused by a figure of factors, the chief grounds are increase in material cost and inaccurate stuff estimations. It is besides of import to place the beginning of investing for the game, the bowl undertaking was wholly funded by South African authorities. Similary, the locale building cost of 2010 Winter Olympic was besides over-budget. The original estimated cost was $ 470 1000000s, but the organizer subsequently revised the budget to $ 580 1000000s to guarantee the locale could run into IOC satisfaction ( ) . However, the concluding cost given by VANOC was $ 603.3 million. The Government of Canada and the Province of British Columbia each committed $ 290 million to venue development plan, along with $ 23.3 million came from value-in-kind from patrons, BC Housing and involvement ( Brumwell, 2010 ) . Sing the compeletion of work, both South Africa and Vancouver successfully finished before their deadlines. A sum of 10 bowls were selected as game locale for the 2010 FIFA World Cup, five of them were newly-built and other five holding undergone monolithic renovation. Building work was due to get down in late 2006, and they were supposed to complete before December 2009. However, it went through a zigzag procedure, FIFA review commission was often kicking about the slow advancement, and some were non ready for the Confederation Cup in 2009 the warm-up event for the World Cup ( Baloyi and Bekker, 2011 ) . Some rumors even claimed that the president of FIFA, Joseph Blatter might look for alternate to host this tourney. But eventually, all 10 bowls were successfully completed on clip and passed scrutiny. During the command procedure for the 2010 Winter Olympics, the modern, brilliant bing featuring locales has been one of Canadas great competitory advantage. With its solid foundation, the VANOC decided to upgrade four locales to necessitate criterion and meanwhile built six new sites. VANOC started venue building every bit early as 2006, and it was developed really swimmingly. By February 2009, one twelvemonth in front of the game, all locales were ready and unfastened for preparation and proving event. Besides, the ticket gross revenues of these two events differed greatly. In April 2010, merely two months before the kickoff, there were still 50,0000 unsold tickets, available to all 64 games including South Africa s lucifers and the concluding. The hapless merchandising was go oning in both host state and abroad market, merely 42 % of allocated tickets were being bought outside South Africa, with 330,000 tickets staying. The concern of expensive airfare, transit, hotel and safety issue had deterred many protagonists. As respects domestic purchasers, the first job was pricing, as most of the flush white occupants prefer watching rugger to football, while even the cheapest tickets ( 140 rand = 12.40 ) , were still out of range for the black community. Another job is the dealing method, The IOC chose cyberspace as a chief gross revenues channel, nevertheless, merely 11 % of South African population were internet endorsers ( ) . To guarantee full bowl, the organiser gave some free tick ets to big companies instead than hapless people, but there was no betterment after the tourney started, the FIFA functionaries were still disappointed with 1000s of empty seats. In constrast, tickets for Vancouver Olympics sold really good, study suggested that VANOC managed to sell over 97 % of the numbering 1.54 1000000s tickets. With respect to abroad gross revenues, more than 75 % of all available tickets were sold. The bowls were full in Opening and Closing Ceremonies and in some popular athleticss such as ice hockey. The high attendence was due to two ground, foremost, the VOC created a fan-to-fan market place on its official web site for reselling and donating the game ticket, which provided great flexiblity for marketer and purchasers. Second, some of official spouses donated over 50,000 tickets, and these tickets were so distributed to the destitute communities ( ) . Operational hazard and unexpected challenge Table 4: Hazard Table of South Africa World Cup Table 5: Hazard Table of Vancouver Olympic Games The 19th FIFA World Cup was the fifth clip held in the South hemisphere. Players have to vie in cold clime once more after 32 old ages. As the sod are to a great extent influenced by the clime, the inauspicious conditions status seemingly brought a large challenge to the organiser. Therefore, FIFA and LOC decided to present the man-made grass to some of bowls. Basically it was a blend of unreal grass ( 3 % ) and nature grass ( 97 % ) , the unreal grass fibers were implanted below the surface and intermingle with the nature grass which can beef up the field ( ) . Thus the intercrossed grass will hold a smooth surface with a hardy root, it will non be affected by upwind status or ferocious undertaking any more. As man-made grass was first employed in World Cup, the populace were filled with expectancy and uncertainty. After playing a lucifer on this revolunary surface, the Algerian manager Rabah Saadane felt the man-made pitch had a negative impact on his squads public presentation. Ne vertheless, most of participants mentioned that it was a challenge but they enjoyed playing on this field ( ) . Safety has been a long-standing issue for South Africa, which is stemmed from racial tenseness, pieces proliferation, high unemployment rate and big income spread etc. Any offenses happened during the World Cup would deface the host state. Awared of these hazards, both LOC and the authorities spent much attempt in battling offense and guaranting the security of visitants. Before the start of tourney, the South African authorities announced that their disbursal in security had reached $ 1 billion, and the SA constabularies service added 41,000 constabularies officer to cover with larceny, vandalism and terroism ( Sylvester and Harju, 2010 ) . The authorities besides invested R45 million to a fast-track condemnable justness system to treat any World Cup-related offense. The suspects were arrested by constabulary and taken to a delicated tribunal where they would confront farther probe ( Sylvester and Harju, 2010 ) In add-on, Joint Operation Centers have been set up at each locale locat ion, and it consisted of constabulary, trefoil and fireman in order to get by with any possible crisis ( Pellegrino, Bam and Dutiro, 2010 ) . It turned out that these moves were really effectual. The reported offense dropped 70 per centum during the World Cup, the tourney passed off peacefully without any studies of violent offense ( Sylvester and Harju, 2010 ) . The South African authorities won international congratulations for its security step. On the contrary, this Vancouver Olympic was doomed to be unsuccessful from first twenty-four hours when Georgian Luger Nodar Kumaritashvili was killed during a preparation tally. Although the paramedics arrived on the scene within seconds after the accident and the athelete was airlifted to a injury centre in Whistler ( Bryant, 2010 ) . However, few hours subsequently, the Georgian deputation confirmed the tragic intelligence. In fact, Luge is seen as the most unsafe athleticss in the Olympics, and it took topographic point in one of the universes fastest path this clip. Furthermore, prior to the awful calamity, there were several little accidents in the same topographic point, and one Rumanian jock lapsed into unconsciousness for a few proceedingss ( Bryant, 2010 ) . But unluckily, these issues had non brought to organizers attending. VANOC did non modify the race path and rise the protective wall on the side of the luge, which resulted in the fatal accident. This calamity had caste d a somberness over the game and it was merely a beginning of catastrophe. A series of accidents followed afterwards, the sudden prostration of ice-resurfacing equipment led to the delay of speedskating events, and one Slovenian jock injured during the cross-country race. More earnestly, VANOC didnt reckon for the unseasonably mild conditions. This caused a job at Cypress Mountain, as snow could run in the locale of freestyle skiing and snowboarding competitions. Therefore the organizer had to desperately transport dozenss of snow from environing mountains and even cancelled some competitions ( Broom, 2010 ) . To get by with the refund, the functionaries once more did a hapless occupation, as they merely refund to the original purchaser, and wholly ignored those who bought ticket from jobber. The loss in ticket gross was about $ 1.5 million, merely a bantam portion of VANOC s $ 260 million in ticket gross, but harm in public-relation was much more serious. ( Broom, 2010 ) Post-event Bequest Hosting a big international athleticss event promises non merely the exhilaration of the event and media exposure for the host state but besides the outlook of a positive return on the considerable investing associated with hosting this type of event. Harmonizing to the statistics provided by LOC, the entire gross generated by 2010 World Cup exceeds R38 one million millions, which was 45 % more than the mark. Furthermore, the month-long World Cup contributed R93 one million millions to South Africas GDP growing ( Sylvester and Harju, 2010 ) . In the long term, the monolithic substructure betterments will be benefited by local occupants, and it would move as a accelerator for societal development. Besides, the success of World Cup had changed the international perceptual experience of this state. FIFA president, Sepp Blatter awarded the host state a 9 out of 10 for its organisation. Another study indicated that 92 % of foreign visitants would urge South Africa to others as a tourer finish ( Sylvester and Harju, 2010 ) . These positive responses would surely pull more tourers and abroad investing. The Canadian authorities had predicted that the gross of Winter Olympic approximates $ 9.6 one million millions, but finally, the entire income was about $ 1 billion ( ) . Furthermore, the overall cost of this game was over $ 6 one million millions, 6 times more than the old budget. Therefore, the Olympic Game created debt job for Canada, and this immense load demands to be shared by the local occupants. But except from the immense shortage, the Olympics had left strong bequests for the host state. One of the durable effects was in environment country. The Vancouver Olympic was praised for more than Green game, they had developed a new sustainability benchmark for the hereafter mega featuring event ( ) . In add-on, VANOC received the Excellence for Green Building award from the Globe Foundation and the World Green Building Council for constructing the greenest Olympic territory in North America ( ) . Lesson learnt from the undertakings From my position, although South Africa met with some jobs during the readying such as cost overproduction in locale building and hapless ticket merchandising. But they successfully manage the possible hazards and challenges during the tourney, and besides received both touchable and intangible benefits. Vancouver Olympic Games, by contrast, the organizer win in presenting the undertaking on clip and within its budget, but the tourney was labelled as a failed undertaking due to the awful hazard direction and immense shortages. By comparing these two undertakings, there were several critical lessons to larn. First, exposure to put on the line could do terrible result, hence hazard direction is necessary for undertaking. It requires non merely proper designation of each hazard but besides seasonably and effectual action to undertake them. From the illustration of Winter Olympics, VANOC did non take every potency hazard into consideration. They underestimated the chance and impact of unusual conditions and mechanical snafu, which led to detain and even cancellation of the game. Furthermore, the Olympic organiser did non respond quickly when a hazard had been spotted. Before the Olympics, VANOC and path interior decorator had been informed by the International Luge Federation sing the unsafe luge race path in Whisler Sliding Centre, but the organiser did non do any alteration on the path. After the path was opened for proving and preparation, some incidents occurred and caused hurt. However, there was still no mark of alteration which led to the decease of Georgian jock. Second, cost overproduction sometimes seems ineluctable in a big, long time-span undertaking. Statistical information shows, over the past half century, cost overproduction arises in all the Olympic Game after subtracting the rising prices rate. There are multiple internal and external factors occur during the undertaking. Internal factors such as inaccurate measure take-off, alteration orders by client ( Baloyi and Bekker, 2011 ) . External factors such as fiscal crisis, domestic currency depreciation, rise in natural stuff monetary value. Therefore, for future undertaking directors, they have to keep a good relationship with patrons to procure support. They besides need to fix a elaborate cost-benefit analysis for patrons to convert them of investings. Furthermore, in the early phase, the undertaking squad estimates the budget with small information. The demand is to put more clip in the early briefing phases of design to clearly specify a undertaking s range and complexness. Last, the undertaking director should analyze the existent status of every part, instead than trusting on empiricist philosophy. Particularly for an international undertaking, it is of import to guarantee the same communicating engineering is available across the sites. The organisers of South Africa World Cup wrongly believed that on-line ticket merchandising is favorable in every state, but in fact, the cyberspace use in this state was comparatively low compared to the old host states such as Germany and Japan. This resulted in a hapless ticket merchandising and low mean attending.

Globalization Effects on the Economies of the Third World

Globalization Effects on the Economies of the Third World Introduction Globalization is concept that has numerous effects on the economic and political systems of any country in the modern world. This means that it affects the growth of the country in a number of ways given the fact that foreigners are allowed to invest freely.Advertising We will write a custom proposal sample on Globalization Effects on the Economies of the Third World specifically for you for only $16.05 $11/page Learn More Research shows that locals would not have any advantage in case they are exposed to similar economic and political conditions with foreigners mainly because they do not have similar financial muscles as compared to foreigners. It is noted that globalization has a number of agents, with technology and multinational corporations being some of them. These agents facilitate the process of globalization by promoting foreign investment. Research shows that multinational corporations give much pressure on governments of the poor stat es to implement some of the defective policies that do not benefit the locals. For instance, they advocate for the opening up economies since it gives them an advantage. Research shows that local companies in the third world cannot compete favorably with multinationals since they do not have adequate capital. Huge conglomerates take advantage of their capital to advertisement goods and services, which is a disadvantage to the local companies. In terms of politics, globalization affects poor states in a number of ways. One of the effects is that the state is not sovereign since it has to consult all actors in the global system before coming with a policy. This proposal suggests a study that would look explore the effects of globalization on the economies of the third world.Advertising Looking for proposal on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Literature Review Existing body of knowledge suggest that globalization has changed the way polices are made in the third world since no domestic and foreign policy is made without the involvement of major stakeholders, which are usually foreign companies and organizations. For instance, states in the third world with large deposits of oil are forced to involve foreign oil companies in designing local policies since they are the major stakeholders. Some foreign organizations are even accused of fueling violence in various parts because they thrive well under hostilities. The problems affecting citizens in Congo serve as an example because American firms extracting resources are known to interfere with peace. Through globalization, it is claimed that public corporations should be privatized to spur economic development. This affects the locals since they lose jobs. In the third, privatization of local companies was identified as one of the things that would encourage development since these firms were making loses. Moreover, they were misma naged since politicians played a major role in recruiting the staff. Privatization of public corporations encourages profit making. On the other hand, private companies are in a position of competing favorably since they are managed professionally.Advertising We will write a custom proposal sample on Globalization Effects on the Economies of the Third World specifically for you for only $16.05 $11/page Learn More Analysis of literature shows that some scholars are against the idea of privatization since it does not promote the interests of the locals in the developing countries. Such scholars believe that public enterprises are able to compete favorably if given support and enough funding. How Globalization Affects Economic Development of the Third World Dollar, D., Kraay, A. (2001). Growth Is Good for the Poor. Policy Research Working Paper, 1(2), 89-98. According to the above scholars, globalization is understood variously implying that it should be anal yzed within a certain context. While some scholars note that globalization has contributed to economic development in the third world, others are of the contrary view. Opponents lament that it is the main cause of poverty hence it should be discarded. Therefore, the views of the above scholars suggest that globalization plays an enabling, as well as a constraining role. Based on this view, globalization is the source of economic development, as well as poverty that is persistent in the third world. Dollar, D. (1992). Outward-Oriented Developing Countries Really Do Grow More Rapidly: Evidence from 95 LDCs, 1976-85. Economic Development and Cultural Change, 40(4), 523-544. Countries that restrict trade through tariffs and other forms of restrictions experience retarded economic growth because investors shy away from punitive trade laws. Such states lag behind in terms of economic development. Dollar observed that the living standards of the poor in the third world are on the rise owin g to globalization. In their analysis, globalization boosts economic growth and reduces poverty in a number of countries that embrace it.Advertising Looking for proposal on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More The scholar noted further that a number of countries are yet to embrace globalization fully, which is the reason for their persistent underdevelopment and poor living standards among citizens. Such states have closed trade policies that only favor local citizens. Moreover, such countries have weak economic institutions that do not facilitate trade development, resulting to designing of poor economic policies. With globalization, the handling of diseases, such as malaria is very easy. The prevalence of diseases is one of the factors that impede economic development. Due to geographical barriers, the costs of transportation are always high. Therefore, globalization is hailed for reducing the costs of transportation because it supports improved transport and communication networks. Dollar proved through research that even though free flow of trade and investment do not resolve the issues related to poverty, immigration and free movement of people, which are some of the agents of global ization, are perfect solutions to the issues related to poverty. Bain, W. (2003). The Political Theory of Trusteeship and the Twilight of International Equality. International Relations, 17(1), 59-77. Developing countries are unable to attract foreigners due to high insecurity and poor infrastructural development. In fact, Dollar noted that this is what is missing in developing countries, which leads to increased poverty and poor living standards. Globalization has failed to produce its desired results in developing countries because some of the fundamental elements are missing. Apart from defective policies and poor infrastructural designs, lack of government support has resulted to negative effects. The scholar notes that the government has a crucial role to play by ensuring that the country is connected to the rest of the world in a manner that would benefit the common citizen. In the developing countries, this aspect is absent because the government does not play its crucial rol e of creating an enabling environment for individual fulfillment of his or her ambitions. In this regard, the government should always improve the education system. This implies that graduates should be competent in the global market. In terms of information circulation, the populace should be aware of what is happening at the global scene (Bain, 2003). Brett, E.A. (2011). From Corporatism to Liberalization in Zimbabwe: Economic Policy Regimes and Political Crisis, 1980-1997. International Political Science Review, 2(6), 43-58. Brettt (2011) was of the view that globalization presents real opportunities to the developing countries. In this regard, globalization would be perceived as an agent of development given the fact that it helps poor countries rediscover their lost glories. This would definitely reduce poverty and improve the standards of living of the local poor. Globalization demands that countries liberalize their economies by allowing private ownership of property and non- interference in the market. This means that the government should never try to meddle in the affairs of the market because the market is expected to operate according to its own internal logics. Liberalization of trade is just one of the provisions of globalization, which is hailed for supporting the poor. Liberalization gives citizens of any country a chance to engage in economic development without governmental interruption. However, some scholars are against this view. They note that globalization is only meant to bring pain and anguish to the poor, who are already marginalized. Scholars taking a neutral view believe that globalization presents opportunities to some individuals while causing havoc to others. Such scholars utilize the works of Marx to argue that only the rich benefit from globalization because it is simply an extension of the ruling class. In other words, globalization is a tool used to subjugate the poor and push them to the periphery. Political Effects of Global ization Islam, A. (1999). Globalization and Development Revisited in the Light of Asian Experience. Asia Specific Development Journal, 6(2), 1-21. Islam (1999) was of the view that globalization impedes the economic growth of a state largely because of the existence of foreign resources that are prevalent in the financial system. This supports foreign direct investment. Globalization supports the inflow of overseas wealth. This obstructs the autonomy of the state. Through expertise and the idea of intercontinental business, the state is incapable of coming up with policies that are able to offer a resolution to issues affecting members of society mainly because the views other actors are always taken into consideration before formulating foreign guiding principles. This interferes with the autonomy of the state. Technology allows people and capital resources to move rapidly from one state to the other. State borders are no longer respected because restrictions are not good for trade . Governments of the third world countries do not have full powers to control activities that take place in their state borders since business is mobile. Moreover, business corporations are considered major stakeholders in the decision-making processes meaning that they must always be consulted before formulating foreign policies. If policies of the state do not favor multinational corporations, they relocate their activities to other places with sound economic and political policies. This affects the economy of the state because the government loses income that is always generated through taxation. Research Question Does globalization affect the political and economic activities of the developing countries? Globalization is popularly defined as the process of worldwide amalgamation, which is a result of exchange of perspectives, merchandise, opinions, and other aspects of civilization. Globalization exemplifies the relations across cultures, for instance conviction, political affai rs, and capital matter. Globalization can deteriorate and universalize the uniqueness of a local society. Construction of the highways and rail systems, as well as the surfacing of the internet, is the major facet of globalization, which results in interdependence of monetary and cultural activities. This article suggests a study that would evaluate the effects of globalization on the economies and political affairs of developing countries, particularly those in Africa and Latin America. The study would argue that globalization has affected political and economic activities of third world countries in a number of ways. References Bain, W. (2003). The Political Theory of Trusteeship and the Twilight of International Equality. International Relations, 17(1), 59-77. Brett, E.A. (2011). From Corporatism to Liberalization in Zimbabwe: Economic Policy Regimes and Political Crisis, 1980-1997. International Political Science Review, 2(6), 43-58. Dollar, D. (1992). Outward-Oriented Developin g Countries Really Do Grow More Rapidly: Evidence from 95 LDCs, 1976-85. Economic Development and Cultural Change, 40(4), 523-544. Dollar, D., Kraay, A. (2001). Growth Is Good for the Poor. Policy Research Working Paper, 1(2), 89-98. Islam, A. (1999). Globalization and Development Revisited in the Light of Asian Experience. Asia Specific Development Journal, 6(2), 1-21.

Change and Development in the English Language Bachelor Essay

Change and Development in the English Language Bachelor - Essay Example ..is evidently Germanic." (Domingue, 90) Topic Sentence 2: The Middle English phonological component, as against that of the Old English, exhibits significant innovations such as the addition of a French stress pattern carried by the lexical loans and the reinforcement of a phonemic status for the voiced fricatives which also contributed to the development of the Middle English. Topic Sentence 3: Another chief characteristic that helped in the formation of the Middle English is the lack of any specific standards as in the Old English and "the fact that there was no written standard in Middle English as in Old English gives us evidence that these changes took place at different times in different areas..." (Trips, 7) Topic Sentence 4: Syntactic differences between Old English and Middle English can be apparently comprehended and "While (classical) Old English had a rather elaborate inflectional system for both verbs and nouns, much of this had withered away by early Middle English, and further reductions took place in the course of the Middle English period." (Fischer, 69) There have been significant changes in the Middle English phonology and syntax compared to Old English which helped the development of Middle English.

Water for Profit Essay Example | Topics and Well Written Essays - 750 words

Water for Profit - Essay Example Sometimes a sense of urgency of solving this problem is lacking until it is too late to do anything and then suffer its adverse consequences causing untold misery and numerous unnecessary deaths. It used to be that water from any source is clean and safe to drink, whether from the spring, river, lake or artesian well. Prior to the advent of the Industrial Revolution, this was a case usually in most rural areas. But the rise of factories and urban centers occasioned by the Industrial Revolution forced many people to live in congested and confined areas with little or no regard to sanitation. Before Western medicine and scientific research took hold, epidemics were fairly common, most of them caused by dirty water that had water-borne diseases in it. A new paradigm must be pursued regarding water resources, that although it is renewable, it is a not inexhaustible resource. There are many instances and situations where there is plenty of water but none of it is drinkable due to pollution. This paper examines a modern phenomenon of water being sold for profit, an unthinkable situation even just a few decades ago. People no longer trust their tap water and resort to drinking supp osedly purified water in plastic bottles. Nobody can dispense with drinking water. The rise of big cities and urban centers is a sign of progress and development. These areas require modern methods of sewerage and the sewage system, together with piping potable water into homes and offices. In his book, author Peter H. Glieck lamented the war on tap water in favor of profits and big business to the utter detriment of ordinary people. Good public governance requires those in power to provide all the basic necessities in life, through utilities such as municipal water and electricity to power homes and businesses. Suddenly, public water fountains disappeared from most public areas and bottled water is

Decision questions Assignment Example | Topics and Well Written Essays - 250 words

Decision questions - Assignment Example A  fall  in sales volume may be because of poor advertising, competition, or reduced  production. Therefore, a  manager  who  is not committed  may be slow in identifying any  possible  problem that is causing the change in sales volume compared to a committed manager. Also, managers who are unable to combine analytical and creative thinking may not be able to handle complex, ambiguous operations, which require sophisticated techniques to identify any arising problems. The fundamental differences between Delphi process and nominal group are as listed below. In nominal group technique, members of the group form a list of ideas privately, then one member of the group present one item from the list and they are recorded publicly. Conversely, Delphi process is a process of decision-making which depends on a panel of experts who make decisions while in different locations. In nominal, decisions are made by a group which has a group leader who will present the ideas while in Delphi, every group member give ideas independently. In nominal, the ideas are exchanged verbally while in Delphi, the ideas are conveyed via electronic bulletin board, fax or in online discussion rooms (Whetten & Cameron, 1998). Finally, in nominal criticism of the presented ideas is not allowed while in Delphi it is allowed. Delphi would be better situated than nominal in the cases whereby the ideas needs expertise, while nominal would be better situated over Delphi in the situations exchange of the ideas verbally for convenience (Whetten & Cameron, 1998). The two processes would be controlled by consistent appraisals so as to get fruitful outcomes and get the best

Artificial Intelligence in Business Applications

Artificial Intelligence in Business Applications Artificial Intelligence and Robotics Business functions that can/cannot be automated INTRODUCTION Computer systems today are a part of almost all businesses; this is because they provide us, along with the added use of the Internet, with a variety of means that made business operations easier, productivity higher, and communication processes faster. Computers and the programs (or the software applications that are installed on them) along with the robotic systems do a great amount of the tasks that were previously performed by the employees and/or workers themselves. This transformation, towards an automated work environment, saved businesses a lot of unwanted expenses, a lot of time, and caused profits to increase steadily. Computers substituted, in different business structures, classical machines and tools, such as the calculator, the fax, the telephone, the photocopier and many more. The automation of different business functions led many organisations and companies to a higher level in what concerns production and management. But the point that should be understood is that even though many processes and functions related to businesses and organisations have been automated, there are still many aspects that are not, or that cannot be, automated for a wide range of reasons. BUSINESS FUNCTIONS The main objective of any business is to achieve success. To be able to reach success, an organisation needs to have an effective structure because any entity depends exclusively on two factors which are management and use of information. An efficient use of information systems can allow an easier and faster access to data that are essential for the workflow and for the quality of that work and, therefore, can assist the management in performing its duties in the best possible manner and in making the right decisions at the right times. In order to achieve such objectives, specific business functions should be established and specific tasks should be performed. Every kind of business and every organisation, depending on the nature of their operations, the products or services that are provided by them, their geographic location, and depending on the management and production schools that they relate to, have different business functions, but there are certain generic functions that apply to all kinds of businesses all over the world. These functions are usually general management, information management, operations management, marketing, finance and accounting, and human resources. Lan and Unhelkar (2005) identify the various generic business functions by stating that they are the function of Management and Administration which is the department whose tasks are to â€Å"corporate resources, corporate image, quality in all aspects, industrial relations, stakeholders relations, productivity, [and] promotion,† the function of Human Resources that should deal with â€Å"job analysis, position classification, employee training, employee selection, employee auditing and promotion† in addition to other related tasks, the function of Finance and Accounts that is responsible for â€Å"the capital operations required by the entire enterprise activities the funds required by management, administration, sales, marketing, human resources, [and] purchasing,† the function of Purchase and Procurement, the function of Sales and Marketing, and the function of Customer Care or Customer Support. According to another source, â€Å"business functions are universal and apply to every type of business. The most essential business functions are marketing, operations (production of goods and services), finance, and human resource management† (Plunkett, Attner, and Allen 2005). Here, we find a view according to which all functions are the same regardless of the type of business. The main question is to understand whether the above mentioned functions can be in whole or in part automated and/or computerised. In other words, can all the tasks concerning the business functions be transferred to intelligent electronic or robotic agents reaching the level of efficiency and proficiency in which humans are capable of performing them? AUTOMATION AND ARTIFICIAL INTELLIGENCE In order to understand if all (or only some) business functions can be automated, it is important to understand the meaning of the concept itself. According to MSN Encarta (2005) automation is a â€Å"system of manufacture designed to extend the capacity of machines to perform certain tasks formerly done by humans, and to control sequences of operations without human intervention. The term automation has also been used to describe non-manufacturing systems in which programmed or automatic devices can operate independently or nearly independently of human control. In the fields of communications, aviation, and astronautics, for example, such devices as automatic telephone switching equipment, automatic pilots, and automated guidance and control systems are used to perform various operations much faster or better than could be accomplished by humans.† For us to reach such a system, a certain computerised aspect should be developed; an aspect which enables machines to execute given tasks according to the desired level. For such an objective, experts and programmers should be able to produce information systems that possess some of the characteristics of intelligence; this is why such systems are referred to as systems of artificial intelligence, or simply intelligent machines; in other words, computerised systems that are pre-programmed to perform a certain mission with the same level of accuracy of a trained human being. It is the science of creating machines that are intelligent, and in a more specific context, intelligent computer software-programs functioning according to the present hardware. It attempts to comprehend the mechanisms in which human intelligence works and then imitates it in the way the prospective intelligent machines should work, avoiding the limitations of biologically related weaknesses. Bailey (1992) describes his understanding of intelligence as the ability to reason or have a logical thinking, and to have an effect on the environment; this will require a good level of knowledge that should be acquired. To be able to simulate humans, machines should possess the capability of understanding the world. Computers, or intelligent machines, should be knowledgeable on a level that is even deeper and more detailed than we are Depending on knowledge, intelligent machines (or computers or robots) will be in a position to answer any of our questions, they could perform any task efficiently, and they can solve complex and difficult problems much more rapidly. Bailey also states that another important feature that intelligent machines should have is connectivity to each other all around the world through the use of networks, which will make it even easier for them to gain more knowledge and to communicate it to one another. Then there is another feature that is the ability to establish an effective level of communication between intelligent computers and humans through both written and verbal means and not through commands typed through a keyboard and a screen. Finally Bailey puts the physical qualities, such as vision, hearing, as the final of his desired intelligent computer or robot through the use of visual and auditory sensors similar to, or better than, those of humans. AUTOMATING BUSINESS FUNCTIONS The organisational structure is the setting that defines all the departments of the organisation, identifies the responsibilities and duties of each department, regulates the relationship between the various departments and explains how each of them should interact with the others in the way that guarantees the achievement of the desired outcome. As Clarke and Anderson explain, â€Å"an organizational role is defined as a set of functions together with a set of obligations and authorities. The same human or artificial agent can play several roles† [within that specific organisation] (187). The various tools of Information Technology can assist the company in gathering, elaborating, processing, storing/documenting, and distributing all the information that is needed for planning, decision making, and control. The use of computers and the simplicity they offer are important elements in what concerns the enhancement of all the mentioned processes. This fact explains how information technology influences the way in which organisations tend to arrange the tasks and processes within them. Ross (2003) explains that â€Å"information technology (IT) has progressively become key link integrating the business enterprise and its logistics capabilities with its customers and supplies Simply, the organization’s ability to create, collect, assimilate, access, and transfer information must be in alignment with the velocity of the activities necessary to execute effectively supplier, customer service, logistics and financial processes.† As mentioned earlier, many aspects related to the various tasks of businesses are now computerised and/or automated. Accounting and financial processes, for example, are not done only on paper as they once used to be; instead complete computer systems that rely on software applications are those that elaborate, document, communicate, and distribute the various pieces of information among different employees working in different departments. Another example is that related to the processes of sales and marketing which depend heavily on the Internet and the means of communication offered by it. â€Å"Sales force automation modules in CRM [Customer Relation Management] systems help sales staff increase their productivity by focusing sales efforts on the most profitable customers, those who are good candidates for sales and services. CRM systems provide sales prospect and contact information, product information, product configuration capabilities, and sales quote generation capabilitie s† (Laudon and Laudon 2006). For what concerns the accounts and finance function, there are clear indications that many of its tasks have been computerised. â€Å"Large and medium-sized businesses are using ASPs [Application Service Providers] for enterprise systems, sales force automation, or financial management, and small businesses are using them for functions such as invoicing, tax calculations, electronic calendars, and accounting† (Laudon and Laudon 2006). Another form of automation in this context is presented by Sanghvi (2007) as he states that â€Å"online technologies have enabled payroll services to become a popular way for accounting firms to improve client service, enhance loyalty, and gain incremental business Many small business owners turn to their accountant for back-office services while they focus on growing their businesses,† and this means that, through online systems, they can provide the external accountants with all the information needed in order to produce their legally a ccurate and acceptable financial documentation. Concerning human resources management, there are certain computerised systems that are capable of performing the main parts of the process that are related to that function. Torres-Coronas and Arias-Oliva (2005) refer to what they define as e-recruiting; which consists of the â€Å"practices and activities carried on by the organization that utilizes a variety of electronic means to fill open positions effectively and efficiently. The e-recruiting process consists of the following iterative steps: identification of hiring needs; submission of job requisition; approval of the job requisition via a job database; job posting on the Internet; online search of the job database by job seekers, online pre-screening/online self-assessment; submission of applications by applicants directly into an applicant database; online search of the applicant database for candidate selection; online evaluation of rà ©sumà ©/application; interviewing by recruiters/hiring managers; online pre-employment screening; and job offer and employment contract† Another example of a computerised business function, which is auditing, is presented by Caster and Verardo (2007): â€Å"The increasing prevalence of complex computer information systems and electronic data interchanges has made most business transactions electronic in nature Technological advances have altered not only the actual form of evidential matter required to be obtained by auditors, but also the competence of this evidence. Technology has had a significant impact on audit evidence, and existing auditing procedures could be improved in many ways.† The authors indicated that new technologically related regimes of audits have been created to automate the auditing process. Laudon and Laudon (2006) explain that certain businesses took enormous steps towards the automation of the entire processes related to their core activity: â€Å"The management of UPS decided to use automation to increase the ease of sending a package using UPS and of checking its delivery status, thereby reducing delivery costs and increasing sales revenues The technology supporting this system consists of handheld computers, barcode scanners, wired and wireless communications networks, desktop computers, UPS’s central computer, storage technology for the package delivery data, UPS inhouse package tracking software, and software to access the World Wide Web.† The author indicates that the various processes of UPS have improved substantially thanks to the computerisation and inter-connectivity of their functions. When we study the potentials of automation for what concerns business functions, it should be clearly stated that each function is a separate case with its own factors and qualities, which can allow or limit the possibilities of full computerisation of its different processes and tasks. Dorf and Kusiak (1994) state that almost every aspect of the manufacturing process can be automated: â€Å"Most manufacturing operations can be automated. Given the large number of manufacturing processes and assembly operations used in industry (the number is in the thousands) and the many possible ways in which any given operation can be automated.† The authors give different examples of automated systems, such as the Automated Production Lines (which is â€Å"a production system consisting of a series of automated workstations connected by an automatic parts transfer mechanism†), Position and Motion Control Systems (which are required to position â€Å"a work head or tool relative to a work part to accomplish a process†), and the Industrial Robotics (which are â€Å"general-purpose programmable machine possessing certain anthropomorphic characteristics†). When the other business functions are examined, we find that almost every single task within the realm of each function can be automated: Information concerning the major issues related to the business as a whole can be produced by computer systems on regular basis, and passed on to management for examination and study before reaching the right decisions in what concerns the survival and progress of their organisation. Accountancy and financial processes can be completely handled by intelligent systems that can, for example, calculate wages according to working hours, process payments to institutions and banks through electronic means over the Internet, can produce invoices and receipts to customers and suppliers, and can also manage shareholder’s issues. In the human resources function, information and requests can be effectuated electronically, but the final step, which is employees selection, cannot be performed by automated systems; because here the human factor and the hu man inter-activity is, and most probably will always be, the determining point. This is also valid for what concerns sales and marketing, the computerised system can perform all that is needed except the stages related to policy making and to physical delivery of products, as here the human factor is still required. There are certain missing parts if the desired objective is to reach a total automated business; such parts can be overcome only if (or when) we manage to solve deep and important problems in what concerns artificial intelligence. Creating systems that can ‘think’ as humans and can perform tasks related to the human factor will not be a fast endeavour, as we are still in the beginning of what concerns understanding and imitating intelligence. CONCLUSION As mentioned earlier, most of the tasks that are related to virtually all business functions can be computerised and/or automated, but the most important element is still the human factor. At the present level of technology, we are unable to create a fully automated business and we cannot transform an existing business entirely into a computerised one. Some business functions, such as accountancy and information management can be fully automated, some other functions, such as human resources and sales and marketing, can be computerised to a very high level, while other functions, such as general management, cannot be automated. Another reason, beside the technological limitations of the field of artificial intelligence today, is that people (whether customers or suppliers) are still not accustomed to dealing solely with machines. Works Cited Bailey, C. (1992) Truly Intelligent Computers. Coalition for Networked Information [online]. Available from: http://www.cni.org/pub/LITA/Think/Bailey.html>  [cited 13 April 2007]. Caster, P. and Verardo, D. (2007) Technology Changes the Form and Competence of Audit Evidence. The CPA Journal, 77(1), pp. 68-70. Clarke, R. and Anderson, P. (2001) Information, Organisation, and Technology: Studies in organisational Semiotics. Norwell, Massachusetts: Kluwer Academic Publishers. Dorf, R.C. Kusiak, A. (1994) Handbook of Design, Manufacturing and Automation. Hobokin, NJ: John Wiley Sons, Inc. Lan, Y.C. and Unhelkar, B. (2005) Global Enterprise Transitions: Managing the Process. Hershey, PA: Idea Group Publishing Inc. Laudon, J. and Laudon, K. (2006) Management Information Systems: Managing the Digital Firm 10th ed. Upper Saddle River, NJ: Prentice Hall. Microsoft Encarta 2006. (2005) Automation. [CD-ROM]. Microsoft Corporation. Plunkett, W. R. Attner, R. F. and Allen, G. (2005) Management: Meeting and Exceeding Customer Expectations. Mason, Ohio: Thomson South-Western Publisher. Ross, D. F. (2003) Distribution: Planning and Control 6th ed. Norwell, Massachusetts: Kluwer Academic Publishers. Sanghvi, A. (2007) Improving Service Through Online Payroll. The CPA Journal, 77(3), pp. 11. Torres-Coronas, T. and Arias-Oliva, M. (2005) e-Human Resources Management: Managing Knowledge People. Hershey, PA: Idea Group Publishing.

Ireland Trip :: essays research papers

The Ireland Trip   Ã‚  Ã‚  Ã‚  Ã‚  When I was fifteen I was with my best friend when we encountered funny experience when we overslept for our first tour of The Taste of Ireland. I stayed over at Ryan’s house. Ryan, my best friend since I was six, and me were leaving fro Ireland the next morning and we were so excited that we slept only two hours all night. The next morning we woke up and got all of our stuff put into his mom’s car. We then told her we’re ready, so we jumped into the car and headed for the Huntington Tri-State Airport.   Ã‚  Ã‚  Ã‚  Ã‚  Once we arrived we jumped out of the car and got our luggage checked in. At the point I was a little nervous because I had never flown in an airplane. We finally make it on the airplane and we were off to Pittsburgh’s Airport. Once we arrived we stepped into the airport and it was huge. No one in the group of fifteen had been in the airport and didn’t know where to go except Mr. Shy, the leader of the group. Our next plane was leaving in fifteen minutes so Mr. Shy had to hurry and get all of us kids together so that we could get on the other side of the airport to catch out next flight. While we were walking through the airport, Ryan asked me, â€Å"If I liked flying yet.†   Ã‚  Ã‚  Ã‚  Ã‚  I asked, â€Å"Why is that?†   Ã‚  Ã‚  Ã‚  Ã‚  He replied, â€Å"This plane is a monster compared to the last one.† We stepped on the plane and I looked towards the back and it looked like there were four hundred seats on the plane compared to the last one, which held only twenty passengers. We got seated, and a few minutes later we started to take off. As we were taking off unlike the crop duster, this plane made me feel like I was implanted in the seats because the plane took off so fast. I was so excited because I was flying on this monster plane. The whole time we were in flight I was watching out the window at the ground where there weren’t clouds below us. Not feeling like we had been on the plane for very long, we arrived in New York to catch our next flight. Once we arrived we went to the section of the airport where our plane is leaving.

Low Voltage Effects on Ac Motors

Low Voltage Effects on AC Motors A drop in voltage will result in a proportionate increase in current. If the current exceeds the nameplate rating and is not corrected, this can result in damage to the motor from overheating Nameplate Rating An electric motor will have a nameplate rating for both voltage and amperage. When a load is on a motor, the motor must draw a fixed amount of power. The required power is about equal to volts times amps. Should the voltage fall below the nameplate rating, the amperage will increase. This can result in increased heat that will shorten the motor's life, according to Motorsanddrives. om. Torque The motor is subject to several kinds of torque. The starting or start-up torque is the amount present when the motor is stationary and power is applied. The pull-up torque is the minimum amount necessary for the motor during the starting sequence. Effects of Low Voltage on Torque A reduced amount of voltage will reduce the amount of torque. This can result in difficulty for start loads. A reduction of voltage to 80 percent would result in a torque value of only 64 percent. In light loads, a reduction in voltage may actually be preferable because it will result in increased efficiency.Even a small voltage unbalance will result in large current unbalance during the running of motor by a factor of 6 times. †¢ Negative phase sequence components will lead to heating of motor †¢ Negative phase sequence currents leads to reduction in motor output torque. †¢ Motor is forced to run at higher slip leading to increased rotor loss and reduced efficiency. †¢ Electricity boards should look in to this phenomenon seriously where irrigation pump sets suffer the voltage imbalance, even 1% loss of efficiency for the country like India would mean a great loss. HP irrigation pump sets with a quantity of 6 Lakh approximate, the loss of power would be 22MW and annual wastage of Rs. 47. 5 millions (At 3 Rs/unit, 4 Hrs of Pump working and 6 month’s season Keys to maximize the service life of industrial motors Why do motors fail? Certain components of motors degrade with time and operating stress. Electrical insulation weakens over time with exposure to voltage unbalance, over and under-voltage, voltage disturbances, and temperature. Contact between moving surfaces causes wear.Wear is affected by dirt, moisture, and corrosive fumes and is greatly accelerated when lubricant is misapplied, becomes overheated or contaminated, or is not replaced at regular intervals. When any components are degraded beyond the point of economical repair, the motor’s economic life is ended. For the smallest and least expensive motors, the motor is put out of service when a component such as a bearing fails. Depending upon type and replacement cost, larger motors—up to 20 or 50 horsepower (hp)—may be refurbished and get new bearings, but are usually scrapped after a winding burnout.Still larger and more expensive motors may be refurbished and rewound to extend life indefinitely. An economic analysis should always be completed prior to a motor’s failure to ensure that the appropriate repair/replace decision is made. Extend Motor Life with Improved Bearing Care Bearing failures are the root cause for the great majority of electric motor downtime, repair and replacement costs. Bearing and motor manufacturers are aware of the situation. Motor repair shops can attribute much of their business to bearing failures.And motor users see bearing failure as the fundamental cause of virtually every electric motor repair expense. Studies conducted by the Electrical Apparatus Service Association also demonstrate that bearing failures are by far the most common cause of motor failures. Knowing that shaft bearings are the Achilles’ heel of industrial electric motors is not a new idea in maintenance departments, but what is new is recognizing that something can be done to prevent most motor bea ring failures. Factors Affecting Bearing Life Electric motors actually present a relatively easy duty for shaft bearings.The motor rotor is lightweight, yet because of its large shaft diameter, the bearings are large. For example, the bearings supporting the 140 lb. Rotor for a typical 40 hp. 1800 rpm industrial motor are so large that they have an L-10 minimum design fatigue life of 3000 years, or 10 percent of the bearings are statistically expected to fail from fatigue after 3000 years of operation. Plant operating experience, however, strongly contradicts such optimistic estimates of motor bearing life. In actual industrial environments, bearing failure is rarely caused by fatigue; it is caused by less-than-ideal lubrication.Because of contaminated lubrication, bearings fail well before they serve their theoretical fatigue life. There are many reasons for less than-ideal bearing lubrication. Lubricants can leak out; chemical attacks or thermal conditions can decompose or break d own lubricants; lubricants can become contaminated with non-lubricants such as water, dust, or rust from the bearings themselves. These lubrication problems can be eliminated. Motor bearings can last virtually forever by simply providing an ideal contamination-free, well-lubricated bearing environment.Conventional wisdom teaches that such an ideal motor bearing environment can be provided by using a dry-running lip seal or using sealed (lubricated-for-life) bearings. Indeed, for many light-duty applications, such bearing protection techniques are often sufficient to allow bearings to last as long as the equipment itself. However, these bearing protection methods have not significantly reduced the rate of bearing failure in severe-duty industrial motors. Bearings in industrial applications continue to fail because of inadequate lubrication caused by lubricant loss, contamination, and decomposition and break-down.Lip seals invariably wear out well before the bearing fails, and sealed bearings inherently foreshorten the life of a bearing to the service life of the contained grease (usually only about 3,000 to 5,000 hours for most industrial services). Maintenance professionals may find the following suggestions on how to forestall motor hearing failure obvious, but some new techniques and technologies are available. Lubricate Bearing at Correct Intervals Despite years of warnings from bearing manufacturers, over lubrication continues to plague many motor bearings. Too much grease can cause overheating of the bearings.The lubrication instructions supplied by the motor manufacturer will specify the quantity and frequency of lubrication. Generally, two-pole motors should be greased twice a year, four-pole and slower motors only once a year. Use the Best Available Grease The most commonly used bearing grease is polyurea-based, a low-cost, low-performance, highly compatible lubricant. However, it does not handle water well, a serious drawback for many industrial appli cations. It reacts readily with water and loses its ability to lubricate bearings. Industrial motor bearings should be lubricated with a synthetic-based aluminum complex grease.A high-quality grease pays for its additional cost in reduced motor downtime and repair costs. Keep Out Moisture Unless the motor is being hosed down or it operates in a humid environment, reasonably shielded motor bearings may not become seriously contaminated with moisture while the motor is running. However, when the rotor is shut down, moisture and condensation can collect on the surface of the bearing components. Eventually, this water breaks through the oil and grease barrier, contacts the metal parts of the bearing, and produces tiny particles of iron oxide.These rust particles make an excellent grinding compound when mixed with the grease. resulting in premature failure of the bearing because of surface degradation. Preventing water contamination is a major challenge to bearing housing design. Close s haft-to-endbell clearances cannot stop the movement of humid air. Contact seals will quit contacting, resulting in large gaps that allow movement of air and water vapor across the bearing. Vapor-blocking bearing isolators, such as the one illustrated, are among the more successful devices presently available to prevent water vapor from entering a stationary bearing.When the motor shaft is rotating, the isolator opens, eliminating the possibility of friction and wear. However, when the shaft is stationary, the isolator closes, preventing movement of air or water across its face. With no wear from rotating friction, the seal may last indefinitely, and surely as long as the fatigue-failure life of the bearing. Keep Out Dirt Lip seals, contact seals, and frequent grease replacement help minimize the amount of dirt and other air-borne abrasives that can contaminate bearing lubricant. These solutions, however, have some drawbacks.Lip seals have a short service life, and frequent grease di splacement is expensive and messy. One successful approach to keeping air-borne dirt and liquids out of an operating bearing is to install a labyrinth-type non-contact seal over the bearing housing. These bearing isolators, readily available from suppliers, combine a tortuous labyrinth path with impingement and centrifugal forces to trap and remove air-borne dirt and liquid; virtually no contamination can reach the bearing. Because the bearing isolator is a non-contact device, it will generally be the longest-lasting component of the motor.Although not intended as such, a bearing isolator could serve as an emergency sleeve bearing if the primary bearing fails, possibly preventing damage to the motor’s stator and rotor. In emergency situations, the bearing isolator can allow continued operation for a short time and still prevent the need to rewind the motor when the bearing is replaced. Bearing isolators constructed of bronze or other non-sparking materials also can prevent ha zardous sparks that could otherwise occur when the bearing’s rolling elements fail. Other SuggestionsImproved bearing protection and lubrication will reduce downtime and the maintenance costs of electric motors, but other important motor design features contribute to long service life, including over-sized high quality bearings, high-tech winding insulation, superior fan design, high-performance paint (such as epoxy) and a strong, rigid cast iron frame. These features, usually standard or readily available, are found in most industrial-grade severe-duty electric motors. High-performance bearing protection systems. however, are not universally accepted as essential for long motor life.Specifying permanent bearing protection for new motors, or retrofitting isolators onto existing equipment, usually requires initiative on the part of the user’s maintenance or engineering staff. Permanent, absolute bearing protection has a greater effect on motor life than any other decisi ons made in specifying, equipping, and caring for electric motors. Keeping bearings lubricated with the right amount of clean, uncontaminated, high-quality lubricant allows bearings in most industrial motors to outlast all other motor components.

Industrial Revolution and Agricultural Revolution

The Industrial revolution began in the early 1800s. The industrial revolution could not have happened if the agricultural revolution had not preceded it. During the Agricultural Revolution several inventions that reduced the need for man power were invented. Two of those inventions were the Jethro Tull seeding drill and the cotton gin. The seeding drill planted seeds in rows which made the crops easier to manage and harvest. The cotton gin was invented in 1793 by Eli Whitney, it took the seeds out of the cotton. The cotton gin made it so that the work that previously needed to be done y fifty men could now be done by one. An idea of the agricultural revolution was crop rotation. Crop rotation was switching the crops into different fields each year which allowed farmers to produce 25 % more crops and more During the agricultural revolution population went up and less people were needed to work on the farms. There were a lot of people that needed jobs but there were not a lot of jobs for people on farms so the people turned to the cities. The time when people went into the cities looking for jobs which caused the populations of the cities to at east double was called urbanization. During urbanization the city of Manchester in the United kingdom grew from 50,000 people to 500,00 people, this rapid increase of population took place during an extremely short period of time. The United Kingdom became the place where the industrial revolution was born. It happened here because the UK had land, labor, and wealth. Factories arose first in Since there were factories everywhere, there were plenty of jobs for the people. Even though the factories did provide jobs for the people they were not good jobs. People started working as young as the age of six. The average work day was 14-16 hours, and that†s a lot of working hours, especially for a young child. Inside the factories the conditions were absolutely dreadful. The air was full of dust and other things that made it practically unbreathable, the machines were dangerous and often took a persons limbs or injured them in other ways. Because the work days were so long and the workers were practically on their feet the entire day people became deformed and had problems with their legs. Despite all the hard labor and dangers of the work place the workers were still paid next to nothing. Eventually working conditions did improve. One of the things that helped improve conditions were unions. Unions were when all of the workers got together to get things that they wanted, they mainly used collective bargaining to get what they wanted. Another thing that helped improve working conditions were legislative reforms. Legislative reforms helped improve working conditions because they regulated and limited several things such as how old you had to be before you could work, how many ours you could work, and how much you got paid. The government also made sure that the factories were safe for people to be working in so that people did not get hurt by the machines so often. Another thing that changed during the Industrial Revolution was public education. Horace Mann made public education free. It is important that we have free public education because we live in a democratic society and people have to be educated to make wise There were also some more positive effects of all these factories. People began to dress better than they had efore and they owned more possessions because the machines were able to make things that they wanted in larger quantities much faster than if they were hand made. People also had money to purchase things that they Laissez Faire translates to â€Å"let do. † The economy called laissez fair had no governmental controls over the economy. In Laissez Faire free trade was allowed which made for a strong natural economy. Adam Smith was a Laissez Faire economist he wrote â€Å"Wealth of Nations,† and his ideas became the basis for capitalism. Capitalism was an economic system in which oney was invested in business ventures with the goal of making a profit. The Laissez Faire economists believed that government controls would ruin the economy. Socialism was the economic system in which the means of production are owned by the public to benefit all equality. Karl Marx was a radical socialist that wrote â€Å"The communist Manifest. † He believed that owners were the â€Å"haves† because they had the money and that the workers were the â€Å"have nots† because they did not have much money. Marx saw this as unfair. He saw history as a class warfare and an overflow of the working class.

Free Essays on Legality Of Same Sex Marriages

Legality of Same-Sex Marriages The proposed legalization of same-sex marriage is one of the most significant issues in contemporary American family law. Presently, it is one of the most vigorously advocated reforms discussed in law reviews, one of the most explosive political questions facing lawmakers, and one of the most provocative issues emerging before American courts. If same-sex marriage is legalized, it could be one of the most revolutionary policy decisions in the history of American family law. The potential consequences, positive or negative, for children, parents, same-sex couples, families, social structure public health, and the status of women are enormous. Given the importance of the issue, the value of comprehensive debate of the reasons for and against legalizing same-sex marriage should be obvious. Marriage is much more than merely a commitment to love one another. Aside from societal and religious conventions, marriage entails legally imposed financial responsibility and legally authori zed financial benefits. Marriage provides automatic legal protections for the spouse, including medical visitation,succession of a deceased spouse's property, as well as pension and other rights. When two adults desire to "contract" in the eyes of the law, as well a perhaps promise in the eyes of the Lord and their friends and family, to be responsible for the obligations of marriage as well as to enjoy its benefits, should the law prohibit their request merely because they are of the same gender? I intend to prove that because of Article IV of the United States Constitution, there is no reason why the federal government nor any state government should restrict marriage to a predefined heterosexual relationship. Marriage has changed throughout the years. In Western law, wives are now equal rather than subordinate partners; interracial marriage is now widely accepted, both in statute and in society; and marital failure i... Free Essays on Legality Of Same Sex Marriages Free Essays on Legality Of Same Sex Marriages Legality of Same-Sex Marriages The proposed legalization of same-sex marriage is one of the most significant issues in contemporary American family law. Presently, it is one of the most vigorously advocated reforms discussed in law reviews, one of the most explosive political questions facing lawmakers, and one of the most provocative issues emerging before American courts. If same-sex marriage is legalized, it could be one of the most revolutionary policy decisions in the history of American family law. The potential consequences, positive or negative, for children, parents, same-sex couples, families, social structure public health, and the status of women are enormous. Given the importance of the issue, the value of comprehensive debate of the reasons for and against legalizing same-sex marriage should be obvious. Marriage is much more than merely a commitment to love one another. Aside from societal and religious conventions, marriage entails legally imposed financial responsibility and legally authori zed financial benefits. Marriage provides automatic legal protections for the spouse, including medical visitation,succession of a deceased spouse's property, as well as pension and other rights. When two adults desire to "contract" in the eyes of the law, as well a perhaps promise in the eyes of the Lord and their friends and family, to be responsible for the obligations of marriage as well as to enjoy its benefits, should the law prohibit their request merely because they are of the same gender? I intend to prove that because of Article IV of the United States Constitution, there is no reason why the federal government nor any state government should restrict marriage to a predefined heterosexual relationship. Marriage has changed throughout the years. In Western law, wives are now equal rather than subordinate partners; interracial marriage is now widely accepted, both in statute and in society; and marital failure i...

Outline the psychometric approach to recruitment and selection. In Essay

Outline the psychometric approach to recruitment and selection. In what ways has this been challenged - Essay Example This paper gives an overview and description of the recruitment and selection process along with a description of the psychometric approach, its benefits and challenges. Main Body Recruitment and Selection Hiring a competent workforce has become quintessential in the midst of uncertainty in external environment, particularly changing customer expectations. Because of this, psychosocial considerations, which includes differences regarding the abilities, motivations, personality and emotions of individuals, are being taken into account while finding the correct fit for the organisation. Torrington, Hall & Taylor (2007) define recruitment as being either internal ( that is hiring of people from within the organisation ) or external (which involves advertising, approaching recruitment agencies, developing corporate websites that accept applications, using newspapers and trade press and various other methods). Furthermore, Newell defines recruitment as being a process that attracts people who possess the attributes that are necessary to perform the job (Newell 2005). Generally, promotion, retirement, transfer, redundancy and technological or customer changes drive the recruitment process (Watson 1994). While recruitment generates the pool of capable applicants that may apply to the organisation, selection involves determining the â€Å"right piece that fits correctly in the jigsaw puzzle†. Herriot (1984) defines the selection process as a social exchange whereby mutual exchange of information takes place between the company and its candidates. Organisations are, therefore, required to shape their expectations depending on the candidate’s personal experience rather than the other way round (Herriot 1984). Selection methods have further been defined as consisting of application forms, interviews as well as tests of which psychometric tests are a part. Traditionally, the recruitment process would be a three-step process involving the development of job de scription, job analysis and finally job specification (Torrington, Hall & Taylor, 2007). The last stage would require determining the human attributes that are necessary to perform the job (Marchington & Wilkinson 2000). Frameworks such as the Seven-Point Plan developed by Roger and the fivefold system of grading laid down by Munro-Fraser comprised of assessing the individual’s impact on others along with his/her qualifications, abilities, motivation and emotional strength (Taylor 2000). Both these models increasingly relied on human judgment which could be highly subjective and prone to bias. This led to the development of a competency-based approach to recruitment whereby the focus shifted on individual qualities to competencies required on the job (Newell 2005) (Redman & Wilkinson 2009). Furthermore, it was realised that traditional approaches assumed fixed personalities which was a self-defeating assumption as far as the candidate’s fit with the organisation was co ncerned. This led to the shift towards the psychometric approach whereby individual differences were recognised. The term psychometrics is merely an abbreviated version of â€Å"psychological measurement†. In other words, it attempts to measure psychological traits of individuals such as their intelligence, attitudes, personality and attributes. According to a research conducted by CIPD, approximately 45% of

Real Options -The Madoff Affair Essay Example | Topics and Well Written Essays - 500 words

Real Options -The Madoff Affair - Essay Example Despite that Madoff had no record of bribery with the authority; his case shows that the financial security top officials were failing in their job How the fraudster managed to pull through during the financial hard times remains a question worth noting. Additionally, most financial managers today, are still perplexed as to how Madoff managed to trick the Securities and Exchange Commission (SEC). The Ponzi scheme raised suspicion a number of times. However, when SEC investigated the firm’s financial records and activities Madoff’s pyramid scheme was undetected. The second important aspect worth noting is that Madoff kept his business low profile and this is why it took long before the scheme was uncovered. This was through secrecy and hiring family members as his top officials in the firm. This was until December, 2008 when Madoff admitted that the firm was â€Å"one big lie†. He specifically confessed this to his son who was a top official in the same firm. The confession came just when the economy was in its worst and banks that had loaned some of the investors’ money counted billion in losses. Mad off firm was stated as a Ponzi scheme which was pyramidal in nature because the past investments returns from earlier investors came from the latest investor’s deposits. Therefore, the returns were not true product of the investments. The firm was stripped naked and the true business conduct was revealed when some of the investors withdrew their funds from the firm. Madoff had funds to pay the investors their interest money and this led to his arrest for crimes of fraud, false financial statements and money laundering among others. The crimes made the perpetrator convicted the maximum of 150 years (Manzakee). The Ponzi scheme not only shocked the financial advisors, SEC but also president Barack Obama. In an interview after Madoff’s conviction, President Obama exclaimed